Glow-worm Boiler Fault Codes Liverpool – Repairs by Gas Safe Engineers
If your Glow-worm boiler is displaying a fault code, has locked out, or you’ve suddenly lost heating or hot water, Response Boiler Repairs Liverpool can help. Our experienced Gas Safe registered engineers diagnose and repair all Glow-worm boiler faults throughout Liverpool and surrounding areas.
Whether your boiler shows F28, F22, F75, F16, F20, F61 or F83, we’ll identify the underlying problem rather than simply resetting the appliance. Many Glow-worm fault codes are designed to protect your boiler from further damage, so accurate diagnosis is essential.
We repair all major Glow-worm boilers including:
- Glow-worm Energy
- Glow-worm Ultimate
- Glow-worm Betacom
- Glow-worm Easicom
- Glow-worm Flexicom
- Glow-worm Micracom
- Older Glow-worm boiler models
Our vans carry professional diagnostic equipment allowing us to test gas pressures, combustion performance, PCB faults, ignition systems, fans, pumps, pressure sensors and safety devices.
Common Glow-worm Boiler Fault Codes We Repair
F28 – Ignition Failure
One of the most common Glow-worm faults. Usually caused by:
- Gas supply issues
- Ignition electrode failure
- Gas valve problems
- PCB faults
- Condensate blockage
F22 – Low Water Pressure
This indicates insufficient system pressure. Possible causes include:
- Heating system leaks
- Faulty expansion vessel
- Pressure relief valve issues
- Filling loop problems
F75 – Pump or Pressure Sensor Fault
Often caused by:
- Seized circulation pump
- Faulty pressure sensor
- Airlocks
- Low system pressure
- Blocked heating circuit
F16 – Burner or Ignition Fault
Can indicate problems with:
- Burner assembly
- Flame detection
- Ignition electrode
- Gas supply
F20 – Overheating Fault
Your boiler has detected excessive temperatures. Common causes include:
- Blocked circulation
- Pump failure
- Heat exchanger restrictions
- Air trapped within the heating system
F61 – Gas Valve or Control Fault
Usually requires professional diagnosis and may involve:
- Gas valve testing
- Wiring inspection
- PCB diagnosis
- Safety checks
F83 – Temperature Sensor Problem
This fault commonly relates to:
- Flow temperature sensor
- Return sensor
- Wiring issues
- Poor circulation
F33 – Fan or Air Pressure Fault
Possible causes include:
- Fan failure
- Air pressure switch fault
- Flue obstruction
- Condensate issues
F64 – Electronic Fault
Often associated with:
- PCB failure
- Sensor errors
- Wiring faults
- Internal electrical issues
F70 – Sensor Configuration Error
Usually appears following component replacement or electrical faults and requires professional setup and testing.
F85 – Control Board Fault
May indicate:
- PCB failure
- Communication errors
- Electrical component faults
- Internal boiler electronics issues
Why Choose Response Boiler Repairs Liverpool?
We’re a traditional family-run Liverpool boiler repair business with more than 20 years of experience repairing Glow-worm boilers across Liverpool.
When you book with us you’ll receive:
- Gas Safe registered engineer
- Local Liverpool family business
- Same-day appointments where available
- Honest fault diagnosis
- Fixed price quotations
- No unnecessary part replacements
- 6-month repair warranty
- Clean and tidy workmanship
- Repairs to all Glow-worm boiler models
Rather than replacing expensive parts unnecessarily, we carry out full diagnostic testing to locate the genuine cause of the fault, often saving customers significant repair costs.
When Should You Call an Engineer?
If your Glow-worm boiler repeatedly locks out, displays the same error code after resetting, loses pressure regularly, makes unusual noises or stops producing heating or hot water, it’s time for a professional inspection.
Repeatedly resetting a boiler without correcting the fault can sometimes lead to additional component damage and more expensive repairs.
Areas We Cover
Our Gas Safe engineer provides services across Liverpool and surrounding areas.
Allerton | Aigburth | Childwall | Woolton | Mossley Hill
Looking for your area? See our Areas We Cover page.
Common Questions About Glow-worm Boiler Faults
What does F28 mean on a Glow-worm boiler?
Can I reset a Glow-worm boiler?
What does F75 mean?
Do you repair older Glow-worm boilers?
Do your repairs come with a warranty?
Call for Glow-worm Boiler Repairs in Liverpool
If your Glow-worm boiler is displaying a fault code or has stopped working, we’ll quickly diagnose the issue and explain the most cost-effective repair.
Response Boiler Repairs Liverpool
☎ 07856 297070
We repair Glow-worm boiler faults across Liverpool with professional diagnostics, quality workmanship and a 6-month warranty on all completed repairs.
Our Latest Blogs & News
Glow-worm- f1 and f28 errors
Overview of the Issue Because Glow-worm and Vaillant are part of the same manufacturing family, they share many internal components and diagnostic codes. One of
Worcester C6 and C7 fault codes
Overview of the Issue Worcester Bosch boilers are among the most reliable heating systems available, but they can still encounter issues that disrupt your home’s
Baxi and Main boilers- E50, E133, E119
Overview of the Issue Baxi and Main boilers are incredibly popular and reliable choices for heating homes. However, like all heating systems, they can occasionally
